①d=圓棒直徑噩振；s=方、六角棒材截面寬度楚陶，矩形棒材的厚度钻寿；t=管材壁厚；單位/mm
②A左刽、A50-標距
? O-退火
? H111-在隨后的拉伸或應變中經過退火和輕微應變硬化(小于H11)捺信。(annealed and slightly strain-hardened (less than H11 ) during subsequent operations such as stretching or straitening)
? T3510-固溶，通過拉伸控制量(設定0.5%~3%對軋管)消除應力+自然時效欠痴。拉伸后的產品不再矯直迄靠。(solution heat-treated, stress-relieved by stretching a controlled amount (permanent set 0,5% to 3 % for drawn tube) and naturally aged. The products receive no further straightening after stretching.)
? T3511-與T3510相同，除了在拉伸后允許輕微矯直以符合標準公差喇辽。(same as T3510 except that minor straightening is allowed after stretching to comply with standard tolerances)
? T4510-固溶掌挚，通過拉伸控制量(設定0.5%~3%對軋管)消除應力+自然時效。拉伸后的產品不再矯直菩咨。(solution heat-treated, stress-relieved by stretching a controlled amount (permanent set 0,5% to 3 % for drawn tube) and naturally aged. The products receive no further straightening after stretching.)
? T4511-與T4510相同吠式，除了在拉伸后允許輕微矯直以符合標準公差。(same as T4510 except that minor straightening is allowed after stretching to comply with standard tolerances)
? T6510-固溶抽米，通過拉伸控制量(設定0.5%~3%對軋管)消除應力+人工時效特占。拉伸后的產品不再矯直。(solution heat-treated, stress-relieved by stretching a controlled amount (permanent set 0,5% to 3 % for drawn tube) and then artificially aged. The products receive no further straightening after stretching.)
? T6511-與T6510相同，除了在拉伸后允許輕微矯直以符合標準公差是目。(same as T6510 except that minor straightening is allowed after stretching to comply with standard tolerances)
