| 牌號 | X8NiCrAITi32-21 |
| 1.4959 | |
| 對應標準 | NF EN 10028-7-2008
壓力容器用不銹鋼扁平產品 Flat products made of steels for pressure purposes - Part 7 : stainless steels |
| 歸類 | 奧氏體不銹鋼 |
| 標簽 | 抗蠕變等級 |
-
高溫下的最小屈服強度
Material designation Heat treatment
conditionMinimum 0.2% proof strength Rp0.2,MPa
at a temperature (in°C) of:Name Number 50① 100 150 200 250 300 350 400 450 500 550 600 X8NiCrAITi32-21 1.4959 +AT 159 140 127 115 105 95 90 85 82 80 75 75 Minimum 1.0% proof strength Rp1.0,MPa
at a temperature (in°C) of:50① 100 150 200 250 300 350 400 450 500 550 600 185 160 147 135 125 115 110 105 102 100 95 95 ① Determined by linear interpolation. -
高溫下的最小抗拉強度
Material designation Minimum tensile strength Rm,MPa
at a temperature (in°C) of:Name Number 50① 100 150 200 250 300 350 400 450 500 550 600 X8NiCrAITi32-21 1.4959 487 465 445 435 425 420 418 415 415 415 - - ① Determined by linear interpolation. -
熱處理指南
Material designation Hot forming Heat
treatment
symbolSolution anneailing
①②Post weld heat
treatment
Creep resisting steelsName Number Temperature
℃Type of
coolingTemperature
℃ ③④Type of
coolingTemperature
℃ ⑦Type of
coolingX8NiCrAITi32-21 1.4959 1150 to 850 air +AT 1100 to 1200 ⑤ water,air ⑥ 900 to 950 ⑧ air ◎ a=air; o=oil; w=water.
◎ Scale and annealing colours produced during hot forming, heat treatment or welding may adversely affect the corrosion resistance. They should be removed as far as possible before use, e.g. by pickling.
◎ The temperatures of annealing should be agreed for simulated heat treated test pieces.
① The solution treatment may be omitted if the conditions for hot working and subsequent cooling are such that the requirements for the mechanical properties of the product and the resistance to intergranular corrosion as defined in EN ISO 3651-2 are obtained and provided these requirements are met even after appropriate subsequent solution annealing.
② Re-crystallizing annealing.
③ If heat treatment is carried out in a continuous furnace, the upper part of the range specified is usually preferred, or even exceeded.
④ The lower end of the range specified for solution annealing should be aimed at for heat treatment as part of further processing,because otherwise the mechanical properties might be affected. If the temperature of hot forming does not drop below the lower temperature for solution annealing.a temperature of 980℃ is adequate as a lower limit for Mo-free steels,a temperature of 1000℃ for steels with Mo contents up to 3% and a temperature of 1020℃ for steets with Mo contents exceeding 3%.⑤ After solution annealing the grain size according to EN ISO 643 shall be 1 to 5.
⑥ cooling sufficiently rapid.
⑦ Minimum holding time:30min.Minimum holding time:30min.
⑧ Minimum holding time:30min.
-
蠕變性能
Designation Heat treatment
conditionTemperature Strength for 1% (plastic)
creep strain in MPa for ①Name Number °C 10000h 100000h X8NiCrAITi32-21 1.4959 +AT 700 59 42 710 55.5 38 720 52 34.4 730 48.5 31.3 740 45 28.4 750 41.7 26 760 38.4 23.5 770 35.6 21.3 780 32.9 19.3 790 30.5 17.6 800 28.2 16 810 26.2 14.7 820 24.2 13.4 830 22.4 12.1 840 20.8 11.1 850 19.1 10 860 17.6 9.1 870 16.1 8.2 880 14.7 7.3 890 13.4 6.5 900 12.1 5.7 910 10.9 5 920 9.8 4.4 930 8.8 3.9 940 7.8 3.4 950 6.9 2.9 960 6.1 2.5 970 5.3 2.1 980 4.6 1.8 990 4 1.6 1000 3.5 1.4 ◎ Values were taken from DIN 17460 [3].
① Values in parantheses involved time and/or stress extrapolation; values with asterisk involved time extrapolation.
材料牌號對應供應商
告訴我在“材數庫”看到洒屡，將給您優惠
1
聯系人：沈經理
移動電話：
13770090340/13390704526
電話：0515-85522226
微信號：13770090340
Email:
登陸后可見
登陸后可見
不銹鋼緊固件系列、不銹鋼螺帽系列鱼练、A4-80外六角系列墩沸、A4-80外六角系列、德標加大加長系列响攘、國標冷鐓車削系列址嘴、鍵銷系列、鉆孔螺桿系列千有、銷系列蚀弹、不脫出螺釘系列、薄頭內六角螺釘系列胶向、半圓頭/壓鉚件系列减叫、鉸制孔螺桿系列、緊定螺釘系列裕坊、沉頭螺釘系列包竹、有色金屬制品系列、異型螺母系列籍凝、牙條雙頭系列周瞎、連接桿系列、折彎件系列饵蒂、閥門配件系列堰氓、防盜桿系列、管接頭系列苹享、螺塞堵頭系列、非標緊固件浴麻、特殊材質緊固件等得问。
[詢價]
注：數據僅供參考！如有疑問软免，請?zhí)顚?我要糾錯"宫纬！