結構鋼熱軋產品 第4部分 熱機械軋制可焊接細晶粒結構鋼 EN 10025-4 - 2004
| 牌號 | 化學成分(質量分?jǐn)?shù)%) |
|
牌號
歐標鋼號
|
|
|
牌號
歐標鋼號
|
|
|
牌號
歐標鋼號
|
|
|
牌號
歐標鋼號
|
|
|
牌號
歐標鋼號
|
|
|
牌號
歐標鋼號
|
|
|
牌號
歐標鋼號
|
|
|
牌號
歐標鋼號
|
① For long products the P and S content can be 0.005% higher.
② For railway applications a maximum S content of 0.012% may be agreed at the time of enquiry and order.
③ If sufficient other N-binding elements are present the minimum total AI content does not apply.
④ Cu content above 0.45% may cause hot shortness during hot forming.
② For railway applications a maximum S content of 0.012% may be agreed at the time of enquiry and order.
③ If sufficient other N-binding elements are present the minimum total AI content does not apply.
④ Cu content above 0.45% may cause hot shortness during hot forming.
注：數據僅供參考，以官方原件為準尿瞭！