熱軋結構鋼鋼材 第3部分：正火/正火軋制可焊接的細晶結構鋼 EN 10025-3 - 2004
| 牌號 | 化學成分(質量分數%) |
|
牌號
歐標鋼號
|
|
|
牌號
歐標鋼號
|
|
|
牌號
歐標鋼號
|
|
|
牌號
歐標鋼號
|
|
|
牌號
歐標鋼號
|
|
|
牌號
歐標鋼號
|
|
|
牌號
歐標鋼號
|
|
|
牌號
歐標鋼號
|
① For long products the P and S content can be 0.005% higher.
② For railway applications a maximum S content of 0.010% may be agreed at the time of enquiry and order.
③ If sufficient other N-binding elements are present the minimum total Al content does not apply.
④ Cu content above 0.40% may cause hot shortness during hot forming.
② For railway applications a maximum S content of 0.010% may be agreed at the time of enquiry and order.
③ If sufficient other N-binding elements are present the minimum total Al content does not apply.
④ Cu content above 0.40% may cause hot shortness during hot forming.
注：數據僅供參考继阻，以官方原件為準娱局！